BUILT VALUE TOUGH

DuraMag is not just a story of ‘Made in the USA’, they’re a story of Made in Maine, where craftsmanship and work ethic is legendary. DuraMag’s 150,000 square-foot facility is located in central Maine. They don’t have fancy digs, but they do have state-of-the-art equipment and Maine ingenuity. Inside their humble surroundings, they do one thing, and they do it well: build the finest aluminum truck equipment in the country.

If you are looking for DuraMag replacement parts, visit our DuraMag parts landing page. If you would like to become the proud owner of a DuraMag truck body or headache rack, fill out a quote request form, and we will get back to you as soon as possible!

SERVICE BODIES

R-Series Service Body

  • All Aluminum (6000 Series) Understructure with Extruded Box Tube
  • Heavy Slam Latch Tailgate with Stainless Steel Lock Rods
  • Premium Roll-Up Safety Designed Doors
  • Extreme Duty (6000 Series) .625 Interlocking Extruded Aluminum Floor
  • Fully Welded Construction – No Rivets, Screws, or Bolts to Come Loose
  • Welded Fender Flares for Superior Strength and Rigidity
  • Sandblasted Metal Preparation (not inferior wash/zinc phosphate)
  • Powder Coated – Standard: White / Optional: Black, [GM/Dodge] Red and [Ford] Red
  • LED Marker Lights (where required)
  • LED Penny Light in Each Compartment
  • LED Ultra-thin 6” Round Stop/Turn/Tail/Backup Body Lights
  • Inner Bed Walls and Exterior Top of Compartments – 1/8” Diamond Plate
  • Adjustable Shelving in Front, Middle, and Rear Compartments (one shelf with dividers in each compartment)
  • Pass-through Panel between Front & Center Compartments
  • Tread Plate Splash Guards on Front Wall – All Models

The DuraMag R-Series has all the same features as the S-Series but replaces the swing doors with roll-up/shutter style doors. These are premium, anodized aluminum doors that are customarily seen on high-end fire vehicles.

S-Series Service Body

  • All Aluminum (6000 Series) Understructure with Extruded Box Tube
  • Heavy Slam Latch Tailgate with Stainless Steel Lock Rods
  • Swing Doors with Nitrogen Props on Vertical Compartments
  • Black Polymer Rivetless Door Handles
  • Extreme Duty (6000 Series) .625 Interlocking Extruded Aluminum Floor
  • Fully Welded Construction – No Rivets, Screws, or Bolts to Come Loose
  • Welded Fender Flares for Superior Strength and Rigidity
  • Sandblasted Metal Preparation (not inferior wash/zinc phosphate)
  • Powder Coated – Standard: White / Optional: Black, [GM/Dodge] Red and [Ford] Red
  • LED Marker Lights (where required)
  • LED Penny Light in Each Compartment
  • LED Ultra-thin 6” Round Stop/Turn/Tail/Backup Body Lights
  • Inner Bed Walls and Exterior Top of Compartments – 1/8” Diamond Plate
  • Continuous Aluminum Piano Door Hinge
  • Adjustable Shelving in Front, Middle, and Rear Compartments (one shelf with dividers in each compartment)
  • Pass-through Panel between Front & Center Compartments
  • Tread Plate Splash Guards on Front Wall – All Models

The DuraMag S-Series is designed for continuous hard work with full length, heavy duty, long sills. What separates this body from the competition is the understructure; the difference is stunning.

Canopy Body

  • Enclosed Service Body that is Full Width
  • Single Shelf per side (located 19” from compartment tops)
  • Rear Barn Doors (includes Barn Door Tie Backs)
  • Standard Heights:
    • 53” (51” Interior Clearance)
    • 63” (61” Interior Clearance)
    • 74” (72” Interior Clearance)
  • LED Dome Light with Switch

The Canopy is an option that’s added to the base Service Body during production. The Canopy Body creates the ultimate enclosed mobile workstation. Securely transport your tools from job to job. Bad weather? Work inside!

LANDSCAPE TRUCK BODIES

EXTRUDED

  • All Aluminum (6000 Series) Box Tube Construction
  • Heavy Duty Long Sills & Light Bar – 2” x 6” x .250”
  • Cross Members at 12” OC – 2” x 3” x 1/8”
  • Premium B-Tube Perimeter Frame 6000 Series
  • Proprietary Extruded Aluminum Flooring
  • Heavy Duty Rear Corner Posts 3” x 3” 6000 Series Aluminum
  • Barn Doors with Polished Stainless Steel Locking Bar
  • Flat Bar Tie Rail 2” x 1/4”
  • Removable Spreader Bar
  • LED Lights Fully Pre-wired Inside Box Tube
  • Extruded Aluminum Headboard with Expanded Metal Window
  • Solid Extruded Sides with Dirt Shredding Extrusion

SMOOTH SIDE

  • All Aluminum (6000 Series) Box Tube Construction
  • Heavy Duty Long Sills & Light Bar – 2” x 6” x .250”
  • Cross Members at 12” OC – 2” x 3” x 1/8”
  • Premium B-Tube Perimeter Frame 6000 Series
  • Proprietary Extruded Aluminum Flooring
  • Heavy Duty Rear Corner Posts 3” x 3” 6000 Series Aluminum
  • Barn Doors with Polished Stainless Steel Locking Bar
  • Flat Bar Tie Rail 2” x 1/4”
  • Removable Spreader Bar
  • LED Lights Fully Pre-wired Inside Box Tube
  • Aluminum Sheet Headboard (.125”) with Expanded Metal Window
  • Aluminum Sheet Sides .125” 5000 Series

CHIPPER / LEAF TOP

  • All Aluminum 6000 Series Box Tube Construction
  • Heavy Duty Long Sills & Light Bar – 2” x 6” x .250”
  • Cross Members at 12” OC – 2” x 3” x 1/8”
  • Premium B-Tube Perimeter Frame 6000 series
  • Proprietary Extruded Aluminum Flooring
  • Heavy Duty Rear Corner Posts 3” x 3” 6000 Series Aluminum
  • Barn Doors with Polished Stainless Steel Locking Bar
  • Flat Bar Tie Rail 2” x 1/4”
  • Removable Spreader Bar
  • LED Lights Fully Pre-wired Inside Box Tube
  • Aluminum Sheet Headboard (.125”) with Expanded Metal Window
  • Aluminum Sheet Sides .125” 5000 series 

DuraMag Landscape Bodies are built with all aluminum box tube construction. The standard headboard includes an expanded metal window and the frame is built using heavy duty long sills and cross members. 

DuraMag offers two models of Landscapes that can fit with your personal preference. The only difference between a Smooth Side and Extruded Side Landscape body is the type of aluminum used to build the walls.

FLATBED TRUCK BODIES

PICKUP DELETE

  • All Aluminum (6000 Series) Box Tube Construction
  • Heavy 2” x 3” Long Sills (6000 Series)
  • 24” OC Cross Members 2” x 3” (6000 Series)
  • Premium G-tube Perimeter Frame (6000 Series)
  • Extruded Aluminum Flooring – (Tongue and Groove – 6000 Series)
  • Extruded Aluminum Headboard with Glide Track for Easy On/Off Accessories
  • LED Lights Fully Pre-Wired Inside Box Tube
  • Stake Pockets & Rub Rail (Both Side & Rear)

CAB CHASSIS

  • All Aluminum (6000 Series) Box Tube Construction
  • Heavy 2” x 3” Long Sills (6000 Series)
  • 24” OC Cross Members 2” x 3” (6000 Series)
  • Premium G-tube Perimeter Frame (6000 Series)
  • Extruded Aluminum Flooring – (Tongue and Groove – 6000 Series)
  • Extruded Aluminum Headboard with Glide Track for Easy On/Off Accessories
  • LED Lights Fully Pre-Wired Inside Box Tube
  • Stake Pockets & Rub Rail (Both Side & Rear)

HEAVY DUTY

  • All Aluminum (6000 Series)
  • Extruded Box Tubing
  • Heavy Duty Long Sills and Rear Light Bar 2” x 5” (6000 Series)
  • Cross Members 12” OC 2” x 3” (6000 Series)
  • Premium G-Tube Perimeter Frame 6000 Series Aluminum
  • Heavy Duty ½” Rub Rail & Stake Pockets (Both Side & Rear)
  • Heavy Rub Rail Reinforcement (Between Stake Pockets)
  • LED Lights Fully Pre-Wired Inside Box Tube
  • Extruded Aluminum Flooring 6000 Series – Tongue and Groove
  • Heavy Duty Extruded Aluminum Headboard with “Below Floor” Gusset
  • Choice of 16” x 32” Expanded Metal Window OR Headboard Cross Bars

You can add Hoists for dumping, rack sides to restrain cargo, sideboards to fully enclose the sides and rear, tarps, tool boxes (underbody and topside), D-rings for securing cargo, rear diamond plate aprons to dress it up a bit or additional headboard lights and strobes. The possibilities are limitless—and they all start with an economical base body that will outlast your truck.

The DuraMag Heavy-Duty Series is strong enough to handle anything the truck is rated for and can be built to maximize your workday efficiency, with a straight truck or a dumping flatbed. Designed for larger class trucks and heavy loads, the Heavy-Duty Series is now the best solution for lower GVW vehicles. These vehicles require aluminum bodies, as steel either consumes too much of the GVW or they’re forced to be underbuilt to allow minimal payload.

Just need a basic replacement bed? The DuraMag pickup delete is a favorite replacement body for rusted or damaged pickup beds. Great looks and function at an affordable price.

DUMP BODIES

2-5 Yard Smooth Side Dump

  • All Aluminum Construction
  • Super Heavy Duty 2” x 6” x 1/4” Long Sills
  • Extruded 3/16” Proprietary Unibody Floor with 2” OC Bracing
  • Double Walled (1/8” Outside, 3/16” Inside) Aluminum Walls for Superior Strength and Appearance
  • Stainless Tailgate Actuator Hardware & Fasteners
  • LED Lights Fully Pre-Wired Inside Box Tube
  • OEM Plug & Play Wiring Harnesses *(Adaptors sold separately)
  • Standard 17” Aluminum Cab Shield with Punched Window

5-7 Yard Smooth Side Dump

  • All Aluminum Construction
  • Super Heavy Duty 2” x 8” x 1/4” Long Sills
  • Extruded 3/16” Proprietary Unibody Floor with 1.69” OC Bracing
  • Double Walled (3/16” Outside, 3/16” Inside) Aluminum Walls for Superior Strength and Appearance
  • Stainless Tailgate Actuator Hardware & Fasteners
  • LED Lights Fully Pre-Wired Inside Box Tube
  • OEM Plug & Play Wiring Harnesses *(Adaptors sold separately)
  • Cab Shield (Truck Specific)

Eco Dump

  • All-Aluminum Box Tube Construction
  • Long Sills 2″x 4″x 1/4″ on TB08485ED
  • Long Sills 2″x 6″x 1/4″ on TB08495ED & TB09795ED
  • Cross Members 12″ OC 2″x 3″x 1/8″
  • G Tube Perimeter Frame
  • Tongue and Groove Extruded Aluminum Flooring
  • Heavy Duty Corner Posts 4″x 6″x 1/4″
  • Double Walled Sideboards (10″)
  • 16” Aluminum Tailgate with Stainless Spring Loaded Top & Bottom Latches
  • Aluminum Cab Shield with Window
  • LED Lights Fully Pre-Wired Inside Box Tube

The DuraMag Smooth Side Dump Body sports clean lines and a stylish appearance. The double walled sides allow for superior strength without the risk of interior impacts printing through to the outside.

The Eco Dump Body is an economical solution for anyone that wants a light-duty dump body. Its intended purpose is residential or light commercial use, where the loads are smaller (it simply won’t hold much volume – cubic feet) and the duty cycle is occasional. This body has all standard features like All-Aluminum construction, LED lights and fully concealed wiring inside the box tube to eliminate corrosion or damaged wiring.

ANTI-RATTLE RACK BODIES

  • Square Headboard with Expanded Metal Window
  • All Aluminum Rack Sections with Stainless Steel Locking Spring Pin
  • Anti-Rattle HDPE Shims with Stainless Rivets on all Stakes
  • Proprietary Spring-loaded Release Lever—No Fail
  • HDPE Body Blocks that Protect Against Rack Abrasion
  • Anti-Rattle Rubber Bumpers
  • HD Version includes 1” x 1” Perimeter Tube Frame around all Rack Sections
  • Available on any body where stake body sides apply

The DuraMag All-Aluminum anti-rattle Stake Body adds flexibility to your fleet.Within minutes, your stake body becomes a flatbed for those loads where rack sides are inconvenient. Hauling loose material that might go through the boards on the side? Check out the ventilated Flex Rack option.

DuraMag knows how annoying a rattling stake body can be, so they have created a stake body that is virtually silent with the use of vibration reduction rubber grommets and high-density polyethylene anti-chafe plates. The proprietary “spring loaded lever system” assures that your rack posts always stay tight and in position so they don’t rattle.

DuraMag rack sides are all built in sections that one person can easily lift off and on. The sections are joined together with stainless steel spring pins. Unpin, squeeze the spring-loaded lever, and lift the rack section out.

CUSTOM TRUCK BODIES

The DuraMag All-Aluminum anti-rattle Stake Body adds flexibility to your fleet.Within minutes, your stake body becomes a flatbed for those loads where rack sides are inconvenient. Hauling loose material that might go through the boards on the side? Check out the ventilated Flex Rack option.

DuraMag knows how annoying a rattling stake body can be, so they have created a stake body that is virtually silent with the use of vibration reduction rubber grommets and high-density polyethylene anti-chafe plates. The proprietary “spring loaded lever system” assures that your rack posts always stay tight and in position so they don’t rattle.

DuraMag rack sides are all built in sections that one person can easily lift off and on. The sections are joined together with stainless steel spring pins. Unpin, squeeze the spring-loaded lever, and lift the rack section out.

VAN BODIES

DURALITE SERIES VAN BODIES (10' - 16')

The DuraLite Series Van Bodies is most popular for Class 2, 3, and 4 chassis, it’s imperative for Class 2 vehicles such as: Ford Transit, Ram ProMaster, and Mercedes Sprinter.

  • 100% Pure High-Strength Aluminum
  • Approximately 45% Lighter than Steel Comparable
  • Bonded, Rivetless Side Skins
  • Aluminum Flooring
  • Additional Options for Specific Needs
  • Best Warranty in the Industry

DURAMAG SERIES VAN BODIES (10' - 28')

The DuraMag Series Van Bodies are designed primarily for Class 4 through 7 chassis. The DuraMag Series comes standard in lengths ranging from 10’-26’.

  • 100% Pure High-Strength Aluminum
  • Approximately 25% Lighter and 15% Stronger than Average Steel Comparable
  • Bonded, Rivetless Side Skins
  • Laminated Hardwood Flooring
  • Additional options for specific needs
  • Best Warranty in the Industry

This is a small overview of the products DuraMag has to offer. For a complete selection of their products, and a full list of details, check out DuraMag‘s website.