THE RIGHT PEOPLE MAKE A BIG DIFFERENCE

It all started in 1951 when H. G. “Jerry” Southern laid the foundation for what would eventually become one of the premiere truck equipment groups on the east coast.  From this beginning, Intercon has grown into a strategic partnership of companies that spans three locations with over 160,000 square feet of manufacturing and installation space and employs in excess of 100 team members. We are a company that prides itself on superior products, quality workmanship and customer service.

Intercon Truck Equipment owes its success to its loyal and hard-working employees, many of whom have been with the company 10 years or longer. Without them, we would not be where we are today. We have been building and investing in the truck equipment industry for the last 66 years and plan to build and invest for many more.

For any and all questions regarding a truck you’ve had us work on, visit the Contact Us page. To browse our insanely large online selection of commercial vehicle products and OEM replacement parts, visit ITE Parts.com. If you have not had a truck worked on here, and would like to change that, fill out a quote request form, and we will get back to you as soon as possible!

Intercon Truck Equipment makes it a habit of exceeding customer expectations. This is proven time and again by the Custom Truck Bodies we make here. From Dump Bodies and Attenuator Bodies, to Platform Bodies and Beavertail Bodies, everything can be tailor-made to a customers specific needs. No matter what kind of outlandish contraption you want assembled on your vehicle, we can make it happen.

The features and specifications for each body type below are basic. The appearance or specs of any body can be altered to fit customer needs.

BASIC DUMP BODIES

SPECIFICATIONS

  • Dump Lengths: 10′ and 12′
  • Dump Outside Width: 96″
  • 5″ and 6″ Structural Channel Long-Sill Heights
  • 3″ Structural Channel Cross-Members on 12″ Centers w/ every cross-member Gusseted to Long-Sill
  • Constructed from ASTM A570 A-45 Hi-Tensile Steel
  • Smooth Steel Floor Fabricated from 7-gauge Steel
  • 10-gauge Steel Sides (26″H on 10′ / 36″H on 12′)
  • Tubing Top Rails / Dirt Shedding Rub-Rails
  • Front & Rear Board Holders (10’10″H / 12’6″H)
  • 8″ Front & Rear Corner Posts
  • Double-Acting Manual-Control Tailgate, Fabricated from 10-gauge Steel w/ Optional Air Cylinder w/ In-cab Control (36″H on 10′ / 42″H on 12′)
  • Tailgate Perimeter Boxed w/ Vertical Bracing
  • 42″H Bulkhead Fabricated from 10-gauge Steel
  • Half-cab Protector
  • Front-Mounted, Single-Acting, Three(3) Stage Telescopic Hoist
  • Cable PTO on Manual Transmission / Hot-shift PTO on Automatic Transmission (Requires Opening in Transmission w/ PTO Gear in Transmission)
  • Controls Mounted to power Tower
  • 20.8 Ton Hoist Capacity on 10′ Length Body
  • 28.6 Ton Hoist Capacity on 12′ Length Body
  • Tarp System – Specify Manual, Semi-Auto or Auto
  • Ladder Step on Driver Side
  • Steel Splash Guards Forward of Rear Axle
  • Single Coal Chute
  • Back-up Warning Device
  • Legal Lights and Flaps
  • All Bodies Primered, and Painted Red or Black
  • 10′ Cubic yardage Capacity: 5.8 / 8.1 Cubic Yards
  • 12′ Cubic yardage Capacity: 9.7 / 11.3 Cubic Yards

SOLID-SIDE DUMP BODIES

intercon-solidside1
intercon-solidside2

SPECIFICATIONS

  • Platform Lengths: 9’6″ to 28′
  • Platform Widths: 88″, 96″ & 102″
  • 5″ to 8″ Structural Steel Channel Long-Sills
  • 3″ or 4″ Structural Steel Channel Cross-Members on 12″ or 16″ Centers (Depending on Length of Body”
  • Every other crossmember gusseted to Long-Sills
  • 1/8″ or 3/16″ Smooth Steel Floor
  • Full-height Solid Steel Bulkhead
  • 3″ Structural Steel Channel Vertical Bulkhead braces
  • 40″ H x 12-gauge Solid Steel Sides (Non-Removable)
  • Formed Exterior Side Braces on 24″ Centers
  • Formed Top Rail on Sides
  • Two (2) Section Rear Barn Doors w/ Hold-Backs
  • Dump Hoist Designed for your Body Length & Chassis GVWR
  • Legal Lights and Flaps
  • All Bodies Cleaned, Primered, and Painted Black

OPTIONS

  • Custom Designed to your Specifications
  • Pine or Apitong Wood Floor in lieu of Smooth Steel
  • Treadplate Steel Floor in lieu of Smooth Steel
  • Recessed D-Rings on Platform at Sides and/or Front
  • Full Cab Protector with Four (4) Tie-Down Loops
  • Chipper Roof (Removable or Stationary)
  • Recessed Marker Lights in Out-Rail of Body
  • Sectioned or One-Piece Removable Sides
  • Non-Standard Height Solid Sides and/or Rear Doors
  • Side Door(s) w/ Grab Handle and Step
  • Plywood Sides in lieu of Solid Steel Sides
  • Expanded metal Sides in lieu of Solid Steel Sides
  • Rear Step w/ Grab Handle on One or Both Sides
  • Aluminum Ramp and Holder on Underside of Body
  • High-mount Stop/Turn/Tail Lights in Rear Posts
  • Non-Standard Colors

DIAMOND SOLID-SIDE DUMP BODIES

intercon-diamonddump1
intercon-diamonddump2

SPECIFICATIONS

  • Platform Lengths: 8’6″ to 20′
  • Platform Widths: 80″, 88″, 96″ and 102″
  • 4″ to 8″ Structural Steel Channel Long-Sills
  • 3″ or 4″ Structural Steel Channel Crossmembers on 12″ or 16″ Centers (Depending on Length of Body)
  • Every Other Crossmember gusseted to long-Sills 1/8″ or 3/16″ Smooth Steel Floor
  • Full-height Solid Steel Bulkhead
  • 3″ Structural Steel Channel Vertical Bulkhead Braces
  • 40″ Double Bend Solid Steel Sides and Rear Doors (Non-Removable)
  • Steel Tubing Top Rail on Sides for Superior Strength
  • Two (2) Section Rear Barn Doors with Hold-backs Legal Lights and Flaps
  • Recessed Marker Lights in out-rail of Body
  • All Bodies Cleaned, Primered, and Painted Black
  • Note: Bodies over 16′ Require Vertical Side Brace

OPTIONS

  • Custom-designed to your Specifications
  • Dump Hoist designed for your Body length and Chassis GVWR
  • Chipper Roof – Specify Section or One Piece
  • Non-Standard height Solid Sides and/or Rear Doors, Side Door(s) with Grab Handle and Steps.
  • “I” or “L” Steel or Aluminum Backpack Toolbox, Tri-Style Tailgate
  • Fabricate from Aluminum in lieu of Steel
  • Holder with Aluminum Wheelbarrow Ramp on Underside of Body
  • Steel or Aluminum Toolboxes
  • Full Cab Protector with Four (4) Tie-Down Loops
  • Recessed D-Rings on Platform at Sides and/or Front
  • High-Mount Stop/Turn/Tail Lights in Rear Posts
  • Non-Standard Colors

LANDSCAPER DUMP BODIES

intercon-landscaper-dump1
intercon-landscaper-dump2

SPECIFICATIONS

  • Platform Lengths: 10′, 12′, 14′, 16′ & 18′
  • Platform Widths: 88″, 96″ and 102″
  • 5″ to 8″ Structural Steel Channel Long-Sills
  • 3″ or 4″ Structural Steel Channel Crossmembers on 12″ or 16″ Centers
  • Every Other Crossmember gusseted to Long-Sills
  • Full-height Solid Steel Bulkhead w/ Vision Screen
  • Full Cab Shield w/ Four (4) Tie-Down Loops
  • First, 24″ of Sides Permanent / Second, 51″ of Sides Swing Door Each Side / Remainder Lift-Out Rack(s)
  • 42″H Sides Fabricated From:
    • Bottom: 24″H, 12-gauge Smooth Steel
    • Remaining: 18″H, 2 Slats w/ Expanded metal Closeout between Slats and Solid Steel
  • 2 Section Rear Barn Doors w/ Hold-Backs with Dimensional Specifications Identical to Sides
  • 18″H or 24″H x 24″L x Full Width Shovel Cross-Box w/ Swing-Door each Side & Lockable Stainless Steel “T” Type Handle
  • Tarp Tie-Down Rail on each Side and Rear of Body Between Vertical Uprights
  • Aluminum Walk-ramp & Rampholder (Ramp Length Dependant on Length of Body), Hasp-type closure for Customer-supplied Master Lock
  • 4 Walk-ramp Hook Holes at Rear of Body and 2 Walk-ramp Hook Holes at each Side Door
  • Dump Hoist designed for your Body length and Chassis GVWR
  • Hitch Package – Combination Pintle Hook / Ball, Trailer Plug and Brake Controller
  • ICC Safety Under-Ride protector
  • Body, Toolbox & Ramp Holder Cleaned, Primed and Painted Intercon Black
  • FMVSS Lights and Mud Flaps

OPTIONS

  • Wood Sides and Rear w/ Steel-capped Edges
  • Plasma Table Cut designs to your specifications
  • All-expanded Metal Sides and Rear
  • Non-Standard Height Sides and/or Rear Barn Doors
  • Solid Steel bulkhead in lieu of Vision Screen
  • Two-section Side Barn Doors in lieu of Single Swing Door – Specify Opening Requirement
  • Custom-Sized Rear Door(s)
  • Banding Rail on Sides and/or Rear
  • Additional Tarp Tie-Down Rail on Sides and/or Rear
  • Non-removable Catch-Bar Stop at End-of-Cab Shield
  • Non-standard Size Cab Shields in lieu of Full Cab Shield
  • Manual Mesh Tarp and Roller w/ Cab Shield Level Crank
  • Spray-in Bedliner on Cross-Box Top for use as Step to Assist in Wheelbarrow Tie-Down Operation
  • Slant Top Cross-Box for easier Dumping
  • Alternative-dimension Cross-Box to your specifications
  • Underbody Toolboxes in Steel and Aluminum
  • Tuck-under Liftgate in lieu of Aluminum Walk-ramp and Ramp holder
  • Non-Standard Colors

CHIPPER DUMP BODIES

_
Print

SPECIFICATIONS

  • Platform Lengths: 9’6″ to 22′
  • Chipper Body Widths: 88″and 96″
  • 6″ to 8″ Structural Steel Channel Long-Sills
  • 3″ Structural Steel Channel Crossmembers w/ every other Crossmember gusseted to Long-Sill
  • 1/8″ to 3/16″ Smooth Steel Floor
  • Solid Steel Bulkhead
  • Solid Steel Sides w/ Exhaust Vents at Top of Sides
  • Side Height to your specifications, but not to Exceed GVWR Rating of Chassis
  • Formed Exterior Vertical Side Braces
  • 30″ Single 270° Swing Rear Tailgate Hinged Curb Side
  • Fixed Roof
  • Legal Lights and Flaps
  • All Bodies Cleaned, Primed, and Painted Black

OPTIONS

  • Custom designed to your specifications
  • Interior Vertical Side Braces in lieu of Exterior Sectioned Removable Roof w/ Hold-Downs
  • Sectioned or one-piece removable sides
  • Diamond-style sides
  • “I” or “L” Backpack Toolbox Between Cab and Body
  • Spray-in Bedliner Non-Slip Safety Coating
  • Interior, Side-Mount, Underbody or Overhead Ladder Rack
  • Articulating Knuckleboom Crane
  • Frame-Mounted Underbody Toolbox(es)
  • Rear Step w/ Grab Handle on One or Both Sides
  • High-Mount Stop/Tail/Turn Lights in Rear Posts
  • Combination Pintle Hook/Ball
  • Electric Brake Controller w/ Trailer Plug
  • Non-Standard Colors

BEAVERTAIL DUMP BODIES

Print
Print

SPECIFICATIONS

  • Platform Lengths: 13′ to 18′
  • Platform Widths: 88″and 96″
  • 5″ to 6″ Structural Steel Channel Long-Sills
  • 3″ Structural Steel Channel Crossmembers w/ every other Crossmember gusseted to Long-Sill
  • 1/8″ to 3/16″ Smooth Steel Floor
  • Full-height Steel Bulkhead w/ Vision Screen
  • 48″ Expanded Metal Permanent-mount Sides
  • 1/4″ Steel Angle Perimeter on Sides
  • Surface-mounted D-Rings on Flat Deck at Sides
  • 72″L (80″ or 88″W) Expanded Metal Spring-assisted Loading Ramps/Doors with w/ Spring-loaded Connectors and Safety Chains
  • Raised Expanded-metal steel on Beavertail
  • 40° to 45° Dump Angle (Depending on Chassis)
  • Recessed Rear Stop/Tail/Turn Lights in Rear Posts
  • Legal Lights and Flaps
  • All Bodies Cleaned, Primed, and Painted Black

OPTIONS

  • Customized to your specifications
  • Recessed D-Rings in lieu of Surface-Mounted on Flat Deck at sides and/or Front
  • Rear Doors reinforced to accommodate Skid Steer
  • Full Cab Protector w/ 4 Tie-Down Rings
  • Side Door(s) w/ Grab Handle and Step
  • Side-Mount Liftgate w/ Side Door
  • “I” or “L” Backpack Toolboxes Between Cab and Body
  • Plasma-Table-Cut designs to your specifications
  • Gussets to Hold Plywood to Inside of Standard Sides
  • Frame-Mounted Underbody Toolbox(es)
  • 4 Models of Tarps
  • Class III/IV Receiver Tube
  • Electric Brake Controller w/ Trailer Plug
  • Non-Standard Colors
  • Back-up Warning Device

BEAVERTAIL BODIES

_
intercon-beavertailbody1

SPECIFICATIONS

  • Platform Lengths: 17′ and 23′
  • Platform Widths: 88″and 96″
  • Last 5′ of Platform length to be Beavertail at approximately 10° angle
  • 3″ Structural Steel Channel Long-Sills
  • 3″ Formed Channel Crossmembers w/ every other Crossmember gusseted to Long-Sill
  • 12-gauge Treadplate steel floor
  • Metal Bulkhead to bottom of window
  • 12″ Expanded Metal Permanent-mount sides
  • 60″L (84″ or 92″W) Expanded Metal Spring-assisted Loading Ramp w/ Spring-loaded Connectors and Safety Chains
  • 1/4″ Steel Angle Perimeter on Bulkhead, Sides and Tailgate
  • Recessed Rear Stop/Tail/Turn Lights mounted on ramps
  • All Bodies Cleaned, Primed, and Painted Black

OPTIONS

  • Customized to your specifications
  • Surface-mounted or Recessed D-Rings on Flat Deck at Sides and/or Front
  • Full-height Bulkhead
  • Full-height Bulkhead w/ Shelf Over Cab
  • Expanded metal Top Cage w/ Drop-down Door
  • Epoxy Non-Slip Safety Coating on Beavertail
  • Epoxy Non-Slip Safety Coating on Flat Deck and Beavertail
  • 10-gauge Treadplate Steel Floor
  • Fold-down Sides on Flat Deck
  • Side Tuk-A-Way Liftgate
  • Step w/ Grab Handle on One or Both Sides
  • Class III/IV Receiver Tube
  • Electric Brake Controller w/ Trailer Plug
  • Non-Standard Colors

PLATFORM / STAKE BODIES

DSC02298
DSC03189

SPECIFICATIONS

  • Platform Lengths: 8′ to 30′
  • Platform Widths: 88″, 96″ & 102″
  • 5″ to 8″ Structural Steel Channel Long-Sills
  • 3″ or 4″ Structural Steel Channel Crossmembers on 12″ or 16″ Centers (Depending on length of body)
  • Every Other Crossmember gusseted to Long-Sills
  • 1/8″ or 3/16″ Smooth Steel Floor
  • Banding Rail on Sides and Rear
  • Pockets on Sides and Rear between Out-Rail and Banding Rail
  • Steel Bulkhead w/ Expanded metal Vision Screen
  • 3″ Structural Steel Channel Vertical Bulkhead Braces
  • Legal Lights and Flaps
  • Stake Racks: 42″ High Lift-out Stake Racks on Sides and Rear
  • All Bodies Cleaned, Primed, and Painted Black

OPTIONS

  • Custom-designed to your specifications
  • Pine or Apitong Wood Floor in lieu of Smooth Steel
  • Treadplate Steel Floor in lieu of Smooth Steel
  • Less Pockets and/or Banding Rail
  • Recessed D-Rings on Platform at Sides and/or Front
  • Extended Outer Vertical Bulkhead Braces
  • Full Cab Protector w/ 4 Tie-Down Loops
  • Recessed Pockets in lieu of Banding Rails
  • Recessed Marker Lights in Out-rail of Body
  • Dump Hoist designed for your Body Length and Chassis GVWR
  • Stake Racks: Non-standard-height Stake Racks
  • Stake Racks: Swing Rear or Side Stake Racks
  • Stake Racks: Structural Steel Channel Stake Rack Posts in lieu of Formed

CYLINDER HAULER BODIES

intercon-cylinderhauler1
intercon-cylinderhauler2

SPECIFICATIONS

  • Platform Lengths: 9’6″ to 28′
  • Cylinder Hauler Body Widths: 88″, 96″ & 102″
  • 5″ to 8″ Structural Steel Channel Long-Sills
  • 3″ or 4″ Structural Steel Channel Crossmembers w/ every other crossmember gusseted to Long-Sills
  • 5″ or 6″ Structural Steel Channel Out-rail around perimeter – Flanges In or Flanges Out
  • 1″ High-grated Steel Floor
  • Full-height Solid Steel Bulkhead w/ Vision Screen
  • 3″ or 4″ Structural Steel Channel vertical Bulkhead braces
  • Steel Tubing Horizontal and Vertical Slatted Sides
  • 4 D.O.T. Placards for each side of Vehicle
  • 2 Rows of E-Track on Bulkhead
  • Legal Lights and Flaps
  • All Bodies Cleaned, Primed, and Painted Black

OPTIONS

  • Custom-designed to your specifications
  • 3/16″ Treadplate or Grip Strut Steel Floor in lieu of 1″ Grated
  • Recessed D-Rings on Platform at Sides and/or Front
  • Spray-in Bedliner non-slip safety coating
  • Removable or Fold-down Sides in lieu of Fixed
  • Stacked and/or Compartmentalized Load Areas
  • Articulating Knuckleboom Crane w/ Lower Bulkhead
  • Rear Step w/ Grab Handle on One or Both Sides
  • Side Door(s) w/ Grab Handle and Step
  • Side-mount Liftgate w/ Side Door
  • Underbody Toolbox(es)
  • E-Track Shoring Bars and Straps
  • High-mount Stop/Turn/Tail Lights in Rear Posts
  • Non-standard Colors

STEEL & LUMBER HAULER BODIES

intercon-steelhauler1
intercon-steelhauler2

SPECIFICATIONS

  • Platform Lengths: 16′ to 30′
  • Platform Widths: 88″, 96″ and 102″
  • 7″ Structural Steel Channel Long-sills
  • 4″ Structural Steel Channel crossmembers on 12″ centers
  • Every other crossmember gusseted to Long-sills
  • 6″ Structural Steel Channel Out-rail around perimeter
  • 3/16″ Smooth Steel Floor
  • Banding Rail on Sides and Rear
  • Pockets on Sides and Rear between Out-rail and Banding Rail
  • Steel Bulkhead w/ Expanded-metal Vision Screen
  • 3″ Structural Steel Channel Vertical Bulkhead Braces
  • Legal Lights and Flaps
  • All Bodies Cleaned, Primed and Painted Black

OPTIONS

  • Custom-designed to your specifications
  • 1-5/16″ Apitong Wood Floor in lieu of Smooth Steel
  • Treadplate Steel Floor in lieu of Smooth Steel
  • Forklift Transportation Reinforcement Kits
  • Less Banding Rail and/or Pockets
  • Dump Hoist designed for your Body Length and Chassis GVWR
  • Winches w/ Loadbinding Straps on Slide Track
  • Permanent-mount Winches w/ Loadbinding Straps
  • Truss/Lumber Supports at Bulkhead and Rear of Body
  • Manual Lock Rollers Recessed Width-wise in Floor
  • Extended Outer Vertical Bulkhead Braces
  • Recessed D-Rings on Platform at Sides and/or Front
  • Ladder Step w/ Grab Handle on One or Both Sides
  • Underbody Toolbox(es)
  • Non-Standard Colors

ATTENUATOR BODIES

intercon-attenuator2
intercon-attenuator1

SPECIFICATIONS

  • Platform Lengths: 15’6″ and 20’6″
  • Platform Widths: 96″ and 102″
  • 6″ Structural Steel Channel Long-sills
  • 4″ Structural Steel Channel crossmembers with every crossmember gusseted to Long-sill
  • Treadplate or Smooth Steel Floor
  • Floor thickness determined by State Weight Requirement for Attenuator
  • Full-height Bulkhead w/ Plasma-cut window 2 x 4″ Stake Pockets on Sides and Rear
  • FMVSS108 Light Package
  • Scorpion TL-3 Attenuator w/ In-cab Controls
  • Trailer Plug for Stop/Tail/Turn Lights on Attenuator
  • Rear Rubber Mud Flaps
  • All Bodies Cleaned, Primed and Painted Black

OPTIONS

  • Alternative Manufacturers of Attenuators
  • Drop-well Cone Pod on One or Both Sides
  • Messageboards and Directional Arrowboards
  • Removable Cone pod on Pull Plate
  • Cone and Sign Holders
  • Stake Racks on Sides and Rear
  • Emergency Lighting and Strobes
  • Directional Work and Area Flood Lights
  • Storage/Job Box in Load Area
  • Underbody Toolboxes
  • Ladder/Steps and Grab Handles
  • Pintle Hook on Pull Plate
  • Electric Brake Controller
  • Non-Standard Colors and Safety Grip Paint

ALUMINUM & CONCRETE BODIES

_
intercon-concretebody

SPECIFICATIONS

  • Platform Lengths: 10′ and 12′
  • Platform Widths: 94″ and 96″
  • 6″ Structural Aluminum Channel Long-sills
  • Plank-extrusion Floor supports on 5″ Centers
  • 37,000 PSI Aluminum Alloy Plank-extrusion Floor
  • Tapered Aluminum Header w/ Louver Vision Screen (2) 96″L x 16″H x 13″D Diamond-plate Aluminum Above-bed Drop-Door Toolboxes – (1) Per Side
  • Remainder of Sides Completed w/ 16″ High-fixed Diamond-plate Aluminum Solid Side
  • 16″H x Full-width 180° Drop Diamond-plate Aluminum Tailgate
  • Load Area Usable Dimensions: 70″W x 114″L (2) 36″L x 18″H x 18″D Diamond-plate Aluminum Underbody Drop-door Toolboxes – (1) Per Side
  • All Body Marker Lights Recessed in Body Rub-rails
  • Chassis Rear Lights Recessed in 10″H Diamond-plate Aluminum Tailboard w/ Wrap-around Corners
  • 2-3/8″ Aluminum Round Tubing Ladder Rack to Front of Windshield with Half-moon Caps
  • Ladder Rack Usable Dimensions: 60″W x 184″L
  • Diamond-plate Aluminum Bottom on Ladder Rack Section Over Cab (60″W x 60″L)
  • Expanded Aluminum Stop at Front of Ladder Rack
  • Body, Toolboxes and Ladder Rack in Natural Aluminum Finish
  • FMVSS Lights and Mud Flaps
  • Approximate 10′ Complete Unit Weight: 1,887 Lbs.

OPTIONS

  • Banding Rail on Sides and/or Rear
  • 48″ Aluminum Underbody Toolboxes in lieu of 36″ (12′ Bodies Only)
  • Hitch Package – Combination Pintle Hook / Ball, Trailer Plug and Brake Controller
  • Alternative Dimension Toolboxes to your Specs

This is only a small set of examples of ways that Intercon Truck Equipment can make your truck-related dreams come true. For big jobs like truck bodies, you can request a quote at any time. If you only need a small amount of work done on your rig, check out our Services page.