The components are E-coated before installation to ensure total paint coverage – even in the most critical areas. You can expect the best rust protection in the industry – period.

A true mechanic’s workbench built to withstand tough work for years to come, featuring 12-30″ workbench bumpers, standard receiver hitch, standard 1/4″ or 5/16″ steel top plate and thru compartment for additional storage.

Every raised compartment comes with Palfinger’s engineered gussets for increased protection against the body cracking in the door corner.

Body construction features two-sided A60 galvannealed steel. The annealing heat treatment process directly after the galvanization of the sheet steel in a hot zinc bath during production causes the iron and zinc to diffuse into each other.

PAL Pro 20

• 40″ standard compartment heights with raised compartment options.
• 9′ and 11′ standard configurations.
• Compartment tops are reinforced to prevent fatigue and cracking.
• Palfinger engineered internal gussets prevents body cracking.
• Full length channel drip rails.
• Double panel doors with internal C-channel stiffeners, adhered with structural adhesive.
• Non-marring boom rest.
• Linear adjustable front mounts.
• 316 marine grade stainless steel hinges.
• A60 galvannealed zinc coated steel.
• Rubber mounted LED lights.
• E-coat primer.

PAL Pro 20 is Palfinger’s newest lightweight mechanics body designed to accommodate service cranes up to 20,000 ft. lbs. of lifting capacity. Designed for on and off-road work, the PAL Pro 20 body features structural reinforcements, 2-piece doors with C-channel stiffeners and automotive door bonding, 316 marine grade stainless steel hinges, and an E-Coat paint process.

PAL Pro 86

• 52″ standard compartment heights with raised compartment options.
• 14′ standard configurations.
• Treadplate cargo floor, load space walls and compartment tops.
• Hybrid torsion box and ladder frame.
• Palfinger engineered internal gussets prevents body cracking.
• Full length channel drip rails.
• Double panel doors with internal C-channel stiffeners, adhered with structural adhesive.
• Non-marring boom rest.
• Workbench featuring 30″ work surface with 5/16″ steel top plate; full width through compartment with hitch receiver tube and reinforced for 15 ton pintle plate.
• Linear adjustable front mounts.
• 316 marine grade stainless steel hinges.
• A60 galvannealed zinc coated steel.
• Rubber mounted LED lights.

The PAL Pro 86 14′ mechanics body is heavy-duty yet lightweight, and rated to support Palfinger’s 14,000 lb crane model with dual extending rear hydraulic outriggers for 100% stability in all lifting zones. Like all of the PAL Pro Mechanics Bodies, it’s also built with all A60 galvanneal steel and features 2-piece steel doors with 316 marine grade stainless steel hinges.

Palfinger’s state-of-the-art Service Cranes feature Electric | Hydraulic and Hydraulic models up to 14,000 Lbs capacity. All crane models feature wireless proportional controls, single-weld hexagonal booms, and are exclusively E-Coated in-house for the best rust protection in the industry. All cranes meet or exceed ASME and OSHA standards, and are backed by Palfinger’s world-class service and support network.

Pair a Service Crane with one of the PAL Pro Mechanics Truck Bodies for the perfect service truck package for your fleet.

Palfinger offers some of the lightest-weight and robust knuckle boom cranes in the industry. With a broad range of models that cover the entire range of working capacities, you can count on Palfinger knuckle boom cranes to match your needs. While fast, efficient, precise, and equipped with market-leading safety systems, these advantages lead to higher performance in a variety of jobs. Great performance starts with a great foundation; all knuckle boom cranes are equipped with Radio Remote Control, KTL Protection, superior hydraulics and other features that are unique to Palfinger.

Offering the best overall total cost of ownership, Palfinger provides the most durable and service-friendly material-handling cranes on the market. Their tare weight is unrivaled in the industry, offering increases in your daily payloads so you can transport more in each delivery. Additionally, these cranes are equipped with hydraulic forks that make it easy to engage, lift and position your building materials. Have confidence in your fleet knowing that PALFINGER, with their vast dealer and service network, will keep you working profitably.

Palfinger provides diverse solutions to grow your business in timber, refuse, scrap, rail and off-road applications with their full line of EPSILON Loaders. With three different boom styles: A-Line, L-Line and Z-Line, and a diverse range of configurations, they’re sure to meet your needs with the right loader for the job. From ease of use and comfort on the job, to maximized speed and productivity, Palfinger’s EPSILON Loaders will be a strong partner.

EPSCOPE, EPSLINK and KTL are core features for a solid, long lasting machine and they’re standard on all boom systems. By investing in PALFINGER you are selecting well-established machines, a trusted global brand and a reliable partner. 

Hinge assembly for rear mounting is made with high-strength structural angles while the pivoting mechanism utilizes greaseless heavy-duty bearings.

Subframes, with patented design, are available in multiple lengths for Drop Hinge Low Profile subframe Hoists. Rear mounting angle hinges integrated into the subframes.

Olympic Twin Stabilized Telescopic Hoists have patented frame stops that prevent the hoist from going over center and the cylinders from bottoming out.

Cylinders have hard chrome rod plating for corrosion and wear resistance. Grease zerks are included for extended pin life. They are coated with high luster black paint for added protection.

• 3 year / 36,000 mile limited warranty
• Provides low mounting height – no alteration of body crossmembers
• Made from special high strength steel to reduce overall weight.
• Heavily chromed and polished cylinder piston rods for longer seal life.
• High pressure, low volume hydraulics for fast cycle times.
• Operating pressure: 3,250 psi
• Heavy structural angle rear hinge for superior strength
• Pre-installed integral body prop automatically positions itself – stores securely out of the way when not in use

• 3 year / 36,000 mile limited warranty
• Made from special high strength steel to reduce overall weight.
• Available with standard PTO driven direct mount gear pump or electric/hydraulic pumps.  
• Full Subrame with integral rear hinge
• Gear pumps are double acting (power up/power down)
• Electric/hydraulic pumps available either single or double acting.
• Unitized construction for ease of installation and added strength
• Heavy chromed and polished cylinder piston rods for longer seal life.
• Lubrication fittings at all pivot points.
• Pre-installed integral body prop automatically positions itself — stores securely out of the way when not in use.

• 3 year / 36,000 mile limited warranty
• 7 year limited warranty on main frame.
• Special high-strength steel components.
• Piston rods and cylinder stages are hard chromed and high polished.
• Unique patented design results in greater torsional stability.
• Self-centering cylinder saddles reduce the possibility of seal or cylinder wall damage.
• Patented frame stop prevents the hoist from going over center and the cylinders from bottoming out.
• High pressure fittings and hoses for greater safety and hoist longevity.
• Low profile reduced mounting height eliminates the need to cut body cross-members.
• Hoist can be mounted in either direction for easy, quick and flexible installation.
• Lifting capacities are greater and the reach is longer than other stabilizer type hoists.
• PTO-driven direct mount gear pump is standard.

Palfinger uses standardized dimensions and a common parts design concept throughout the entire liftgate line. This means that your repair shop can quickly assist you if you have problems.

The majority of Palfinger Liftgate models have standard E-coating or are offered in optional galvanizing. Depending on your needs and area of operation – you can choose your corrosion protection.

Production of all Palfinger liftgates start with using the best available components designed for years of hard labor. Palfinger products feature heavy duty, hardened and corrosion protected pins with low maintenance greasable bushings.

The Premium end of Palfinger Liftgate models are equipped with solid state controls ready for telematics. All of them are internally protected for electric shorts.

ILK Model

The ILK is designed to provide you a tailgate, a rear door and an adjustable dock plate, and built for years of hard use. The solid construction and stable platform enables the operator to adjust to any angle, regardless of the terrain or how your vehicle is positioned.

ILQ Model

The ILQ is designed to provide you a tailgate, a rear door and an adjustable dock plate, and built for years of hard use. The solid construction and stable platform enables the operator to adjust to any angle, regardless of the terrain, or how your vehicle is positioned.

The MiniFix

External mounted solution for panel van applications from Ford, Mercedes, Nissan and RAM. Bolt on installation, prepared for each model (specify with lift order).

The MiniFix does not accommodate the optional Sprinter step bumper. The spare tire has to be relocated from under the vehicle.

The CityFix

Internal mounted solution for panel van applications. The CityFix is a fast and easy bolt on installation which accommodates the different bumpers on the different vans. The spare tire can stay in place. Longer platforms require more interior height in the truck.

ILM+ Model

ILM+ is a medium duty rail type lift that’s loaded with operational and maintenance features.  E-coat proection for great appearance and corrosion resistance.  The modular design allows easy and fast up-grades.

ILD+ Model

The ILD+ is the next generation of direct lifts, giving you the best value and the lowest running costs. The savings and increased component life of integrated power consumption reduction. The durability and appearance of a superior E-coat finish that is applied in an ECO friendly process.

ILD-BG Model

The ILD-BG is all the technological perks of the Plus Model, but in a Bottle-Gas-friendly fashion. The ILD+ is the next generation of direct lifts, giving you the best value, the lowest running costs, and the savings and increased component life of integrated power consumption reduction.

PLR Model

The PLR is perfect for city delivery applications and offers many new features like increased capacities up to 3,300 lbs., dual cylinders for added stability, and large platform sizes in several configurations and walk ramp capabilities. For cold and corrosive climates, the PLR is now available in painted or galvanized power down versions as well.

ILP Model

The ILP Pallet Pro provides significant value at a small premium. The different capacities, arms and platform sizes offer a full mounting range from Low Pro chassis to full size trucks. Standard dual torsion springs on both the main and folding section, adjustable parting rollers and our unique leveling joint which does drag on the ground – makes an exceptionally smooth operating lift.

ILT Model

ILT – Heavy duty twin cylinder liftgate with simple electrical and mechanical platform levelling.  Heavy duty construction with slide in power-pack and standard three piece rear impact guard. Triple torsion springs, together with 3D CAD optimized construction, provides a user-friendly folding lift with a large platform at a low weight.

ILT-WR Model

ILT-WR heavy duty twin cylinder liftgate, with aluminum platform, slide in power-pack and standard three piece rear impact guard, designed for walk ramp dual purpose application.

ILU Model

The ILU Under Slide Lift combines a rapid-mount, large platform with the unobstructed dock loading access of a folding lift, without adding length to the vehicle. The Heavy-duty and simple construction with features such as slide in power pack and torsion assisted flip.

ILUK Model

The ILUK offers a large capacity level ride platform and is stored under the vehicle in a protected position ready for dock loading without any additional operations.  Stores out of the way – use only when needed.

ILFP Model

The flat platform slider offers increased productivity, safety and lower running costs for fleets handling large and bulky products.  The ILFP Side Lift is designed for swing and roll-up door equipped trucks and trailers, and combines features like unobstructed dock loading access with a flat slim-line column lift type platform.

The ILSL is a level ride, flat platform-sliding unit optimized for trailers for the purpose of side-loading. Smart touch control.

The ILF four cylinder folding lift with tilt and closer cylinders allows for a level ride platform regardless of terrain. The ILF liftgate can compensate for up or downhill loading situations and offers one of the largest platforms in its class.

Palfinger liftgates are a cost-efficient market leader in the 1,000 – 1,600lbs light-medium sized truck market. Reliability and versatility are offered with liftgates, in both cable and direct-lift styles, for general transportation and the municipal sector.