• 14 gauge galvanneal steel construction.
• Double panel doors with 14 gauge galvanneal outer panel and 18 gauge galvanneal inner panel.
• 12 gauge tread plate floor.
• 3/16″ A50 high strength steel formed crossmembers at front and rear of body.
• 10 gauge high strength steel formed intermediate cross members.
• 3 full length 14 gauge formed “hat” channel longitudinals for full length floor support.
• Stainless steel integral rod door hinge pins.
• Stainless steel pillow blocks with self-lubricating bushings.
• Stainless steel paddle latches.
• Body fully undercoated.
• Lifetime warranty.

Above specs are for T5680.

• Total Number of S Series Models: 17
• Total Number of T Series Models: 19
• Total Number of J Series Models: 14
• Total Number of L Series Models: 19

• 14 gauge galvanneal steel construction.
• Double panel doors with 14 gauge galvanneal outer panel and 18 gauge galvanneal inner panel.
• 10 gauge high strength steel formed intermediate crossmembers.
• Stainless steel integral rod door hinge pins.
• Stainless steel pillow blocks with self-lubricating bushings.
• Stainless steel paddle latches.
• Body fully undercoated.
• 1/8″ tread plate floor with 3″ longitudinal flange at each body side.
• 4″ (5.4#) structural channel front, rear and extension crossmembers.
• Three full length 12 gauge formed “C” channel longitudinals.
• 1/2″ x 3″ flatbar runners.
• Optional large radius fender opening for large tires.
• Body mounting kit is optional.
• Lifetime warranty.

Above specs are for E84DW94.

• Total Number of E Series Models: 14

• 12 gauge front, rear, and bottom compartment panels.
• Extra deep 22″ compartments.
• 50″ load area Width.
• 12 gauge treadplate compartment tops, load area walls and front bulkhead.
• No wheel boxes in load areas.
• 1/8″ treadplate floor with reinforced understructure and flatbar longitudinal runners.
• Front and rear crossmembers of heavy wall rectangular tubing.
• 12 gauge treadplate overlay on tailgate.
• Crane reinforcement for up to 6,400 Lb. crane (40,000 ft-Lbs) in right rear body compartment.
• Rear light mounts included with body and shipped loose.

Above specs are for G60DX94.

• Total Number of C Series Models: 7
• Total Number of G Series Models: 2

• 14 gauge galvanneal steel construction.
• Double panel doors with 14 gauge galvanneal outer pane and 18 gauge inner panel.
• 1/8” treadplate floor.
• 6” high 8.2# structural steel front, rear and extension crossmembers.
• 3 full length 12 gauge formed “C” channel longitudinals for full length floor support.
• ½” x 3” steel flatbar long runners.
• Stainless steel integral rod door hinge pins.
• Stainless steel pillow blocks with self-lubricating bushings.
• Stainless steel paddle latches.
• Body fully undercoated.
• Large radius fender opening for large tires and roll crown fender molding.
• Shelf package and tailgate are optional.

Above specs are for A124.

• Total Number of A Series Models: 7
• Total Number of CA Series Models: 5

• Overall Height: 30″
• Overall Width: 15″
• Hoist: Power
• Rotation: Manual
• Rotation Break: Mechanical
• Boom Elevation: Manual with Assist
• Boom Extension: Manual
• Retracted Length: 56″
• Extended Length: 80″
• Approximate Weight: 247 Lbs.
• Approximate Shipping Weight: 279 Lbs.

Above specs for 2000-3-5S.

• All 2000 Series Models: 2000-3-5, 2000-3-5S, 2000-3-7, 2000-3-7S

• Overall Height: 21″
• Overall Width: 17″
• Hoist: Power
• Rotation: Manual with Break
• Boom Elevation: Manual
• Boom Extension: Manual
• Retracted Length: 80″
• Extended Length: 122″
• Approximate Weight: 256 Lbs.
• Approximate Shipping Weight: 378 Lbs.

Above specs for 2500-3-9.

• All 2500 Series Models: 2500-3-9

• Overall Height: 34″
• Overall Width: 15″
• Hoist: Power
• Rotation: Power
• Boom Elevation: Power
• Boom Extension: Power
• Retracted Length: 97″
• Extended Length: 145″
• Elevation Travel: -5 thru 75°
• Approximate Weight: 698 Lbs.
• Approximate Shipping Weight: 848 Lbs.

Above specs for 3200-3ERX15.

• All 3200 Series Models: 3200-3ER15, 3200-3ERX15

• Overall Height: 34″
• Overall Width: 20″
• Hoist: Power
• Rotation: Power
• Boom Elevation: Power
• Boom Extension: Power
• Retracted Length: 122″
• Extended Length: 242″
• Elevation Travel: -5 thru 75°
• Approximate Weight: 915 Lbs.
• Approximate Shipping Weight: 1090 Lbs.

Above specs for 4000-4ERX18.

• All 4000 Series Models: 4000-4ERX18

• Ratio: 2, 3, 4
• Gear Cut: L
• Drum: S, A, B, C, D
• Shaft: S, E, C
• Assembly: L, R

• Aluminum bronze worm gears.
• Hardened steel worms.
• Tapered roller bearings on wormshaft.
• Fabricated steel drums will not break.
• Hundreds of standard configurations.
• Available for any power source: mechanical, hydraulic, electric.
• Oil-cooled plate type worm brakes.
• Line pull up to 8,000 Lbs.
• Standard options include capstans, roller assemblies, drum guards, drum-shaft extensions, worm brakes, drums keyed to shaft.
• Custom drums, shafts, and mountings available to meet your individual needs.

• All 08 Electric Series Models: 08ELX, 08ELO/U, 08EUX, 08EUO/U

• Ratio: 2, 3, 4
• Gear Cut: L
• Drum: X, S, A, B, C, D
• Shaft: S, E, C
• Assembly: L, R

• Aluminum bronze worm gears.
• Hardened steel worms.
• Tapered roller bearings on wormshaft.
• Fabricated steel drums will not break.
• Hundreds of standard configurations.
• Available for any power source: mechanical, hydraulic, electric.
• Oil-cooled plate type worm brakes.
• Line pull up to 8,000 Lbs.
• Standard options include capstans, roller assemblies, drum guards, drum-shaft extensions, worm brakes, drums keyed to shaft.
• Custom drums, shafts, and mountings available to meet your individual needs.

• All 08 Hydraulic Series Models: 08HLX, 08HLO/U, 08HUX, 08HUO/U
• All 12 Hydraulic Series Models: 12HLX, 12HLO/U, 12HUX, 12HUO/U
• All 15 Hydraulic Series Models: 15HLO/U, 15HUO/U
• All 20 Hydraulic Series Models: 20HLO/U

• Ratio: 2
• Gear Cut: R
• Drum: S
• Shaft: S
• Assembly: L, R

• Aluminum bronze worm gears.
• Hardened steel worms.
• Tapered roller bearings on wormshaft.
• Fabricated steel drums will not break.
• Hundreds of standard configurations.
• Available for any power source: mechanical, hydraulic, electric.
• Oil-cooled plate type worm brakes.
• Line pull up to 2,000 Lbs.
• Standard options include capstans, roller assemblies, drum guards, drum-shaft extensions, worm brakes, drums keyed to shaft.
• Custom drums, shafts, and mountings available to meet your individual needs.

• All 02 Mechanical Series Models: 02MLX
• All 08 Mechanical Series Models: 08MLX, 08MLO/U, 08MUX, 08MUO/U
• All 12 Mechanical Series Models: 12MLO, 12MLU/O, 12MLX, 12MUO/U, 12MUX
• All 15 Mechanical Series Models: 15MLO/U, 15MUO/U
• All 20 Mechanical Series Models: 20MLO/U