VMAC G30 gas driven air compressors include a patented 30 CFM rotary screw air compressor designed to produce full air power, 100% of the time, so you don’t need an air receiver tank. Get jobs done faster, without interruption.

G30 gas driven air compressors are engineered and manufactured for mobile applications. Weighing only 205 lbs, the G30 is about 50% lighter than typical 22 – 30 CFM reciprocating gas engine driven air compressors with 30-gallon air receiver tank. Choosing a lightweight air compressor means you’ll be able to add more tools and equipment to your truck, carry more materials, or take advantage of better fuel economy.

VMAC air compressors feature the latest rotary screw technology integrated into a compact, turn-key package that is significantly lighter and smaller than any other competitive model. Fit more tools, equipment and supplies on your truck, without hassle.

VMAC G30 gas driven air compressors are proven to work in extreme cold climates across North America when ordered with factory-installed cold climate kits. Engines supplied by Honda come with an industry-leading 3-year warranty and VMAC rotary screw air compressors come with the industry’s first Lifetime Limited Warranty. For peace of mind, without the headache.

• Air Compressor Output
  • 30 CFM @ 100 psi (150 psi max)
• Air Compressor Type
  • Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw
• Engine
  • Honda GX390 air cooled 4-stroke OHV with electric start, EPA and CARB compliant, Honda approved application.
• Weight (wet)
  • Approximately 205 lbs (93 kg)
• Dimensions
  • 23.9”H x 21.4”W x 33.5”L
  • Mounting Plate: 19.125”W x 25.0”L
• Throttle Control
  • 2-speed throttle, responds to air demand
• Battery (included)
  • ACDelco 12V, 300 CCA, 360 CA
• Control System
  • Key switch, choke, hour meter
  • Automatically idles down/up with air demand
  • Unloader decreases engine load, lowers sound levels, reduces fuel use and engine wear
• Safety System
  • Compressor thermal protection circuit
  • Automatic rapid blow-down valve on tank
  • 200psi pressure relief valve
  • Low engine oil pressure shutoff
• Decibels (dB) @ 20 feet (6.1 meters)
  • 81 dB at high idle; 67dB at low idle
• Fuel Tank Capacity
  • 1.6 Gallons (6.1 Litres)
• Air Receiver Tank (recommended for high duty cycle applications in hot climates)
  • 12-Gallon Low Profile Air Receiver Tank – 150 psi max, with gauge, fittings, hose and valves (adds 8.4” (21.3 cm) to height and 80 lbs (36 kg) to weight)

The VMAC D60 diesel-powered air compressor includes a patented direct-driven rotary screw air compressor designed to produce 60 CFM, 100% of the time, so operators don’t have to wait for their air compressor to fill up an air receiver tank. This maximizes tool performance and eliminates downtime.

Weighing just 450 lbs, the D60 is up to 350 lbs lighter than comparable air compressors. This is because VMAC designs systems with lightweight materials and integrated components. Choosing a lightweight air compressor means you’ll be able to add more tools and equipment to your truck, carry more materials, or take advantage of better fuel economy.

What makes the D60 diesel air compressor so intelligent is the digital control system. The control system automatically idles the Kubota diesel engine up and down and turns it on and off with air demand. This means fewer emissions and less noise on the job site. Since the truck engine can remain off while using the air compressor, fleet managers can save on truck maintenance and fuel costs. Another important benefit of the advanced control system is built-in cold and hot climate protection, keeping the D60 running in most extreme climates.

VMAC’s powerful diesel driven air compressors reduce truck maintenance and fuel use by allowing you to turn your truck engine off while on the jobsite. The control system not only automatically idles the compressor’s engine up/down with air demand, it also turns the engine off/on with air demand. This function, along with the lightweight design of the diesel driven air compressor helps improves fuel economy while driving and on the jobsite.

VMAC diesel air compressors are easy to use, access and service. Systems can be integrated into the truck or can remain self-contained so they can be easily transferred from truck to truck. Digital controls and LCD allow easy adjustment of system settings and provide service reminders to operators.

VMAC diesel driven air compressors work in extreme climates across North America with built-in cold/hot climate protection and an optional factory-installed cold climate kit. Systems are powered by Kubota, the most reliable and common compact diesel engine on the market. Patented direct-driven rotary screw air compressors are manufactured by VMAC, and include a VMAC Lifetime Warranty.

• Air Compressor Output
  • 60 CFM @ 100 psi (150 psi max)
• Air Compressor Type
  • Direct-driven, 100% duty cycle, VMAC oil-injected rotary screw
• Engine
  • Kubota Diesel D902 3-cylinder, naturally aspirated 3600 rpm, Tier 4 Final
• Weight (wet)
  • Approximately 450 lbs (204 kg)
• Dimensions
  • 34.5”L x 18”W x 28”H
• Decibels (dB) @ 20 feet (6.1 meters)
  • 83 dB @ high idle; 76 dB @ low idle; 0 dB @ Standby Mode
• Battery
  • AC Delco 12V, 460 CCA, 575 CA
• Control System
  • Easy to use digital control system with adjustable parameters
  • Remote mounted air compressor digital display box
  • With sustained periods of no air use, the control system will shut down the engine
  • Programmable auto restart in cold temperature or low battery voltage
  • Engine auto-restarts with air demand
    Data logging of error codes
  • Automated service reminders
  • 2-speed throttle, responds to air demand
• Safety System
  • Audible warning before system starts
  • Flashing light while system in Standby Mode
  • Automatic rapid blow-down valve on tank
  • 200 psi pressure relief valve
  • Engine and compressor over temperature shutdown
  • Low fuel warning with optional fuel tank
  • Air filter restriction warning
• Cold Climate Protection
  • Adjustable glow plug control.
  • Engine and compressor will wait till the temperatures are above 41°F (5°C) before loading and going into a running state.
  • Engine will automatically restart when system temperature falls below 23°F (-5°C); small heat strip included in LCD Digital Control Box.
  • Optional Cold Climate Model – Includes factory-installed 110VAC Cold Climate Heaters, tested to -40°F (-40°C); Battery jump-start connections for vehicle battery tie-in, will charge the vehicle batteries while running
• Fuel Supply Options (not included)
  • 7-Gallon tank with fuel gauge and low fuel shut-off sensor
  • External diesel fuel pump kit
• Air Receiver Tank (recommended, not included)
  • Minimum 6-Gallon Air Receiver Tank – Recommended for proper operation of all functions.

• Air Compressor Output
  • Up to 70 CFM @ 100 psi (175 psi max)
• Air Compressor Type
  • PTO driven, direct transmission mounted, 100% duty cycle, VMAC oil-injected rotary screw
• PTO
  • CHELSEA® 272 Series, electrically actuated, PTO indicator lamp (RAM);;CHELSEA® 249 Series, electrically actuated, PTO indicator lamp (Ford)
• Weight (wet)
  • Approximately 150 lbs (68 kg)
• Display Box
  • On/Off function of PTO and compressor
  • LCD display
  • Service notifications
  • Error message
  • System temperature
• Throttle Control
  • Variable speed; adjusts truck engine speed automatically to match air demand.
• Safety System
  • Automatic compressor heater function
  • Compressor over-temp sensor
  • Automatic rapid blow-down valve on tank
  • 200 psi pressure relief valve
  • Truck drive disable circuit on throttle control
  • Truck park brake safety shut-off switch on control box

This system is the best choice for customers who are concerned with saving space and reducing weight on their service trucks. The powerful rotary screw air compressor is ideal for operating small to medium sized air tools with high air demand, like 1” impact wrenches, 60 lb jackhammers, backfill tampers, vertical/horizontal grinders and sanders.

• Air Compressor Output
  • Up to 70 CFM @ 100 psi (175 psi max); actual CFM output dependent on engine RPM (see chart below)
• Air Compressor Type
  • PTO driven, direct transmission mounted, 100% duty cycle, VMAC oil-injected rotary screw
• Weight (wet)
  • Approximately 180 lbs (81.6 kg)
• PTO (included)
  • CHELSEA® 249 Series, electrically actuated, PTO indicator lamp
• Hydraulic Pump (included)
  • Various Hydraulic Pump options available
  • Actual GPM output dependent on pump size and engine RPM
• Throttle Control
  • 2 throttle control set-points available
  • Allows for dual speed operation with cranes that have available input/output for high idle mode
  • Adjustable up to 3,000 RPM
• Control System
  • On/Off function of PTO and compressor
  • LCD display
  • Service notifications
  • Allows for simultaneous operation of both the air compressor and hydraulic pump
  • Error message
  • System temperature
  • Compatible with start/stop crane modules
• Safety System
  • Automatic compressor heater function
  • Compressor over-temp sensor
  • Automatic rapid blow-down valve on tank
  • 200 psi pressure relief valve
  • Truck drive disable circuit on throttle control
  • Truck park brake safety shut-off switch on control box

This system is the best choice for customers who are concerned with saving space and reducing weight on their service trucks, and who need both air and hydraulic power at the same time. This multi-power system allows customers to operate small to medium sized air tools, as well as a hydraulic crane or other equipment simultaneously.

40 CFM Hydraulic Air Compressors

VMAC Hydraulic 40 CFM air compressors free up to 6 cubic feet on the truck deck. Systems are designed and engineered to be compact for service trucks and applications where space is limited.

Hydraulic 40 CFM air compressors reduce truck GVW by as much as 260 lbs. This is because VMAC designs systems with lightweight materials and integrated components. Choosing a lightweight air compressor means you’ll be able to add more tools and equipment to your truck, carry more materials, or take advantage of better fuel economy.

Hydraulic air compressors use patented rotary screw technology that can operate intermittently for smaller jobs, but are designed to run at 100% duty cycle without stopping, so operators don’t have to wait for their air compressor to fill up an air receiver tank.  This maximizes tool performance and eliminates downtime by keeping operators working.

60 CFM Hydraulic Air Compressors

VMAC Hydraulic 60 CFM air compressors free up to 8 cubic feet on the truck deck. Systems are designed and engineered to be compact for service trucks and applications where space is limited

Hydraulic 60 CFM air compressors reduce truck GVW by as much as 240 lbs. This is because VMAC designs systems with lightweight materials and integrated components. Choosing a lightweight air compressor means you’ll be able to add more tools and equipment to your truck, carry more materials, or take advantage of better fuel economy.

Hydraulic air compressors use patented rotary screw technology that can operate intermittently for smaller jobs, but are designed to run at 100% duty cycle without stopping, so operators don’t have to wait for their air compressor to fill up an air receiver tank. This maximizes tool performance and eliminates downtime by keeping operators working.

• Air Compressor Output
  • 25-40 CFM* @ 100 psi (150 psi max)
• Air Compressor Type
  • Direct-driven, 100% duty cycle, VMAC oil-injected rotary screw
• Hydraulic Flow Required
  • 9-12 GPM (34-46 LPM); open center hydraulic circuit
• Hydraulic Pressure at Full Load (hydraulic pump is recommended)
  • 2,345 psi (162 bar); 3,000 psi (207 bar)
• Weight (dry)
  • Approximately 150 lbs (68 kg)
• Dimensions
  • 24.0”L x 16.5”W x 18.0”H
• Cooler
  • Integrated hydraulic / compressor oil
  • 12V or 24V fan
• Hydraulic Connections
  • # 12 ORB Inlet, # 16 ORB Outlet
• Control System
  • LCD digital control box with hour meter, service reminders, and error messages.
  • Live monitoring of air pressure, hydraulic and compressor temperatures.
  • Automatic cold climate protection.
  • Automatic warm-up mode extends system life.
  • Standby Mode, turns system off and on depending on air use.
• Safety System
  • Compressor/Hydraulic overheat protection
  • Cooler bypass check valve
  • Overpressure shutdown
  • Automatic rapid blow-down valve on tank
  • 200 psi pressure relief valve
  • Automatic cold climate protection
  • 2,800 psi hydraulic pressure relief valve
• Air Receiver Tank (recommended, not included)
  • Minimum 6-Gallon Air Receiver Tank – Recommended for proper operation of all functions.

*Actual maximum CFM output varies based on model, and GPM of hydraulic fluid to air compressor.

• Air Compressor Output
  • 40-60 CFM* @ 100 psi (150 psi max)
• Air Compressor Type
  • Direct-driven, 100% duty cycle, VMAC oil-injected rotary screw
• Hydraulic Flow Required
  • Open center hydraulic circuit; 14-21 GPM (53-80 LPM)
  • 12-18 GPM (46-68 LPM) – optional HHP model
• Hydraulic Pressure at Full Load (hydraulic pump is recommended)
  • 2,450 psi (169 bar); 3,000 psi hydraulic pump recommended
  • 2,650 psi (183 bar); 3,400 psi hydraulic pump recommended – optional HHP model
• Weight (dry)
  • Approximately 160 lbs (73kg)
• Dimensions
  • 24.0”L x 16.5”W x 18.0”H
• Cooler
  • Integrated hydraulic / compressor oil
  • 12V or 24V fan
• Hydraulic Connections
  • # 12 ORB Inlet, # 16 ORB Outlet
• Control System
  • LCD digital control box with hour meter, service reminders, and error messages.
  • Live monitoring of air pressure, hydraulic and compressor temperatures.
  • Automatic cold climate protection.
  • Automatic warm-up mode extends system life.
  • Standby Mode, turns system off and on depending on air use.
• Safety System
  • Compressor/Hydraulic overheat protection
  • Cooler bypass check valve
  • Overpressure shutdown
  • Automatic rapid blow-down valve on tank
  • 200 psi pressure relief valve
  • 2,800 psi hydraulic pressure relief valve
  • 3,300 psi hydraulic pressure relief valve – optional HHP model
  • Automatic cold climate protection
• Air Receiver Tank (recommended, not included)
  • Minimum 6-Gallon Air Receiver Tank – Recommended for proper operation of all functions.

UNDERHOOD 70 Air Compressors free up to 25 cubic feet on the truck deck because the air compressor mounts in the engine compartment. In fact, no components get installed on the truck deck which ensures a clean and professional looking truck, and space for other equipment, tools or materials. These compressors also reduce truck GVW by as much as 260 lbs. Choosing a lightweight air compressor means you’ll be able to add more tools and equipment to your truck, carry more materials, or take advantage of better fuel economy.

UNDERHOOD 70 air compressors use patented rotary screw technology designed to run at 100% duty cycle without stopping, so operators don’t have to wait for their air compressor to fill up an air receiver tank. This maximizes tool performance and eliminates downtime. UNDERHOOD compressors are powered by the truck’s engine. Because they don’t have their own engine that needs constant maintenance, less time and money is spent on fixing engine issues and more time is spent on jobs making money.

Available Models include:

• UNDERHOOD 40 Air Compressors – Truck Series
• UNDERHOOD 40 Air Compressors – Van Series
• UNDERHOOD 70 Air Compressors
• UNDERHOOD 70 CFM Air Compressors – Green Series
• UNDERHOOD 150 Air Compressors

• Air Compressor Output
  • Up to 70 CFM* @ 100 psi (175 psi max)
• Air Compressor Type
  • Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw
• Total System Weight (wet)
  • Approximately 150 lbs (68 kg)
• Control System
  • LCD display
  • Service notifications
  • Error message
  • System temperature
• Throttle Control
  • Variable speed; adjusts truck engine speed automatically to match air demand.
• Optional Model (VR70G)
  • Includes Standby Mode which reduces vehicle idling time; adjustable parameters

• Air Compressor Output
  • 45 CFM @ 100 psi (175 psi max)
• Air Compressor Type
  • Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw
• Engine
  • Kubota Diesel D902 3-cylinder, naturally aspirated 3,600 RPM, Tier 4 Final

• Battery
  • AC Delco 12V, 460 CCA, 575 CA
• Control System
  • Customizable digital controls
  • Remote mounted generator/welder and compressor control panels
  • Any one function or all three can be selected at any time
  • Engine auto-restarts with air demand
  • Separate selector switches engage compressor, generator and PTO
  • With compressor only selected, and sustained periods of no air use, the control system will shut down the engine
  • With any other function selected, the engine will not shut down automatically
  • Programmable auto restart for cold temperature or low battery voltage
• Cold Climate Protection
  • Adjustable glow plug control.
  • Engine and compressor will wait till the temperatures are above 41°F (5°C) before loading and going into a running state.
  • Engine will automatically restart when system temperature falls below 23°F (-5°C); small heat strip included in LCD Digital Control Box.
  • Battery jump start connections are recommended to be tied into the truck batteries in locations where extreme cold is expected. It is not necessary in mild climates.
• Weight (wet)
  • Approximately 570 lbs (259 kg)
• Dimensions
  • Designed to fit on side pack with center slider, 23”W x 33”L, x 29”H;
  • Base footprint: 30”L x 20”W;
• Decibels (dB) @ 21 feet (6.4 meters)
  • 81.2 dB at high idle, 76 dB at low idle, 0 dB in Standby Mode
• Fuel Supply Options
  • 7-Gallon tank with fuel gauge and low fuel shut-off sensor
  • External Diesel Fuel Pump Kit
• Air Receiver Tank (recommended, not included)
  • Minimum 10-Gallon Air Receiver Tank – Recommended for proper operation of all functions