Stellar Industries

The use of latex clothing in fashion design,How to find the best deals on latex dresses sexy lingerie latex The history of the latex catsuit and its evolution over time,The challenges of fitting a latex catsuit to different body shapes and sizes latex lingerie

Stellar Industries was founded in 1990 in Garner, Iowa, and has since expanded operations to multiple U.S. locations. Stellar is a 100% employee-owned and operated manufacturer of high-quality work trucks and trailers, as well as service truck and van accessories. Through an innovative, growing product line and an expanding distribution network, Stellar has gained an international presence and become the No. 1 productivity choice in many markets.

If you are looking for replacement parts for any Stellar Industries equipment, visit our Stellar parts landing page. If you are looking to purchase any Stellar Industries equipment, fill out a quote request form, and we will get back to you as soon as possible!

STELLAR INDUSTRIES PARTS

REQUEST A QUOTE

SINGLE-STAGE PISTON AIR COMPRESSORS

Direct-drive, no belts to break or adjust. Cast-iron crankcase and cylinder heads for durability.

MODEL 8P

8 cfm @ 100 psi
Hyd. req: 7 gpm @ 1800 psi
Maximum pressure: 150 psi
Single-stage, Two-cylinder
Imbedded air filter
23″ L x 14.5″ W x 17″ H
Weight: 125 lbs

Uses Model 143 Pump

MODEL 13P

13 cfm @ 100 psi
Hyd. req: 7 gpm @ 1800 psi
Max. pressure: 150 psi
Single-stage, Two-cylinder
Imbedded air filter
26″ L x 14.5″ W x 17″ H
Weight: 125 lbs

Uses Model 200 Pump

MODEL 30P

30 cfm @ 100 psi
Hyd. req: 11 gpm @ 1850 psi
Max. pressure: 150 psi
Single-stage, Four-cylinder
Canister air filter
26.75″ L x 19.75″ W x 19.5″ H
Weight: 225 lbs

MODEL 70P

70 cfm @ 100 psi
Hyd. req: 18 gpm @ 2650 psi
Max. pressure: 150 psi
Single-stage, Four-cylinder
Canister air filter
31″ L x 22.5″ W x 22″ H
Weight: 300 lbs

Uses Model HV60 Pump

TWO-STAGE PISTON AIR COMPRESSORS

Cast-iron, one-piece cylinder and head design – no head gaskets to fail.

MODEL 23P

23 cfm @ 175 psi
Hyd. req: 8 gpm @ 2300 psi
Max. pressure: 175 psi
Two-stage, Two-cylinder
28″ L x 19.5″ W x 27.5″ H
Weight: 325 lbs

MODEL 46P

46 cfm @ 175 psi
Hyd. req: 17-19 gpm @ 2500 psi
Max. pressure: 175 psi
Two-stage, Four-cylinder
33.5″ L x 25″ W x 27.5″ H
Weight: 425 lbs

MODEL 60P

60 cfm @ 175 psi
Hyd. req: 16 gpm @ 2300 psi
Max. pressure: 175 psi
Two-stage, Two-cylinder
46″L x 24″W x 35″H
Weight: 655 lbs

MODEL 110P

110 cfm @ 175 psi
Hyd. req: 24 gpm @ 2300 psi
Max. pressure: 175 psi
Two-stage, Four-cylinder
43″L x 28″W x 36.5″H
Weight: 900 lbs

ROTARY-SCREW AIR COMPRESSORS

Air on-demand as required. 100% duty cycle rated for continuous use.

MODEL 30R

Single-stage oil injected
30 cfm @ 100 psi
Hyd. req: 12 gpm @ 1750 psi
Max. pressure: 150 psi
24″ L x 19.75″ W x 20.75″ H
Weight: 175 lbs

MODEL 45R

Single-stage oil injected
45 cfm @ 100 psi
Hyd. req: 10-12 gpm @ 2600 psi
Max. pressure: 150 psi
29″ L x 26″ H x 22″ W
Weight: 310 lbs

MODEL 65R

Single-stage oil injected
65 cfm @ 100 psi
Hyd. req: 16-18 gpm @ 2750 psi
Max. pressure: 150 psi
29″ L x 26″ H x 22″ W
Weight: 345 lbs

MODEL 130R

Single-stage oil injected
100-150 psi
130 cfm @ 150 psi
26 gpm @ 2400 psi
43.5″ L x 31″ H x 28″ W
Weight: 325 lbs

COMPRESSOR PUMPS

Single-stage air compressor pumps, assembled at Stellar’s shop in Garner, Iowa.

MODEL 143

Single-Stage Two-Cylinder
2-5/8″ Bore x 2″ Stroke
Lubrication: Splash
Discharge: 1/2” NPT
Flow: 3.1 to 8 CFM
HP Required: 1, 1-1/2 , 2, 3
Speeds: 400 to 1250 RPM
Weight: 52 Lbs

MODEL 200

Single-Stage Two-Cylinder
2-3/4″ Bore x 2-1/2″ Stroke
Lubrication: Pressure
Discharge: 3/4” NPT
Flow: 8 to 13 CFM
HP Required: 2, 3, 5
Speeds: 800 to 1300 RPM
Weight: 60 lbs

MODEL V230

Single-Stage Four-Cylinder
2-5/8″ Bore x 2″ Stroke
Lubrication: Splash
Discharge: 3/4” NPT
Flow: 12 to 23 CFM
HP Required: 3, 5, 7.5
Speeds: 800 to 1300 RPM
Weight: 80 lbs

(Shown with Optional Flywheel)

MODEL V360

Single-Stage Four-Cylinder
2-5/8″ x 2″ Stroke
Lubrication: Pressure
Discharge: 3/4” NPT
Flow: 12 to 23 CFM
HP Required: 3, 5, 7.5
Speeds: 800 to 1300 RPM
Weight: 70 lbs

MODEL V480

Single-Stage Four-Cylinder
2-3/4″ x 2-1/2″ Stroke
Lubrication: Pressure
Discharge: 3/4” NPT
Flow: 16 to 30 CFM
HP Required: 5, 7.5, 10
Speeds: 800 to 1300 RPM
Weight: 89 lbs

MODEL HV60

Single-Stage Four-Cylinder
3.4″ Bore x 3.6″ Stroke
Lubrication: Pressure
Discharge: 1” NPT
Flow: 52 to 70 CFM
HP Required: 20, 25
Speeds: 1000 to 1200 RPM
Weight: 117 lbs

This is a small overview of the products Stellar Industries has to offer. For a complete selection of their products, and a full list of details, check out Stellar‘s website.

STELLAR INDUSTRIES WEBSITE